Introduction to Concave gear, how much is the price of the gear?

Concave gearis an important part of transmission mechanical devices.，is a common Concave gear，has been favored by more and more customers.。The following is to introduce the Concave gear:

1、Brief introduction of Concave gear

Concave gearis a mechanical element made by forging process, with teeth on its rim, which can cooperate with other Concave gears or racks to realize the transmission of power and movement.，It has a wide range of uses, including Transmit motion and power., Improve transmission accuracy and efficiency, Transmit motion and power., Bear load and impact and Improve transmission accuracy and efficiency，it is widely used inmining machinery,Construction machinery and equipment,automobile making,Construction machinery and equipment,mining machinery and other industries，is an advanced Concave gear developed by our company in combination with the actual situation of the industry。

Concave gear

2、Concave gear performance advantage

The advantages of Concave gear are as follows:

1. Improve production efficiency and material utilization rate

Forging process can usually form multiple Concave gears at one time, and there are fewer subsequent processing steps, thus improving production efficiency. At the same time, due to the high utilization rate of materials in the forging process, the waste of materials is reduced and the production cost is reduced.

2. Good wear resistance

In the process of forging, the grain of metal material is refined and the hardness is improved, thus enhancing the wear resistance of the Concave gear. This enables the Concave gear to maintain good performance and prolong its service life during long-term use.

3. Long service life

Because of its strong bearing capacity, high precision and good wear resistance, the service life of the Concave gear is relatively long.

4. Improve the overall mechanical properties.

Forging process not only improves the strength and toughness of the Concave gear, but also helps to improve the mechanical properties of the Concave gear. The improvement of these properties is helpful to improve the overall performance and stability of the transmission system.

5. Strong bearing capacity

After the forging process, the internal structure of the Concave gear is compact, and there are no defects such as porosity and slag inclusion, so the bearing capacity is strong.

Concave gear

3、Concave gear use

Concave gearMainly used forTransmit motion and power.,Bear load and impact,Improve transmission accuracy and efficiency,Transmit motion and power. andBear load and impact，Cheap and high quality。

Concave gear

4、Concave gear HD real picture

The Concave gear looks beautiful and atmospheric, and it is realistic for customers to visit.。

Concave gear

Note: All the pictures in this article were taken by Jianing manufacturer.。

5、Concave gear HD real shot

Jianing provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Concave gear

As you can see from the live video.，Jianing forging The application of alloy steel material and heat treatment technology makes the Concave gear surface hard and wear resistant.、Because of its strong bearing capacity, high precision and good wear resistance, the service life of the Concave gear is relatively long.、In forging process, the dimensional accuracy and shape accuracy of the Concave gear can be ensured through accurate die design and control. Compared with casting and other processes, the forging Concave gear has lower error and more accurate tooth profile, which is helpful to improve the stability and efficiency of the transmission system.、After forging process, the internal structure is compact, and there are no defects such as porosity and slag inclusion, so the bearing capacity is strong.、It can ensure that the size accuracy and shape accuracy of the Concave gear reach a higher level.。

6、How much is the Concave gear?

The Concave gear price is introduced as follows:

1. Low cost of raw materials

The cost of manufacturing Concave gear varies from manufacturer to manufacturer. The higher the cost of manufacturing products, the higher the product price will be. On the other hand, the lower the production cost, the lower the product price, but the quality of products with high production cost is guaranteed, which can reduce the maintenance cost of customers.

2. Product technology

The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.

3. Model size

The same product, with different specifications and models, requires different materials and accessories when manufacturing. Moreover, the products with different specifications and models have different performance, and the manufacturers have different production costs, so the prices of products with different specifications and models are also different.

4. Manufacturer's sales model

If there is no middleman to earn the difference, then the Concave gear price will naturally decrease. Jianing adopts the business model of "self-production and self-marketing" to sell products, thus realizing "one-on-one" sales, so the comprehensive price of our products is relatively high.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Concave gear

Concave gearthe advantage is The application of alloy steel material and heat treatment technology makes the Concave gear surface hard and wear resistant.、After forging process, the internal structure is compact, and there are no defects such as porosity and slag inclusion, so the bearing capacity is strong.、Improve production efficiency and material utilization: Forging process can usually form multiple Concave gears at one time, and there are fewer subsequent processing steps, thus improving production efficiency. At the same time, due to the high utilization rate of materials in the forging process, the waste of materials is reduced and the production cost is reduced.、It can ensure that the size accuracy and shape accuracy of the Concave gear reach a higher level.、Because of its strong bearing capacity, high precision and good wear resistance, the service life of the Concave gear is relatively long.，is a kind of high quality and low price Concave gear，is a mechanical element made by forging process, and its rim is designed with teeth, which can cooperate with other Concave gears or racks to realize efficient transmission of power and movement.。