Introduction to Forged parts for axle and shaft heads and forging structure principle

Forged parts for axle and shaft headsforging equipment is used to apply external force to the blank, so that the metal blank is plastically deformed, so as to obtain forgings with required geometric shape and quality.，be loved by our customers.。The following is to introduce the Forged parts for axle and shaft heads:

1、Brief introduction of Forged parts for axle and shaft heads

Forged parts for axle and shaft headsrefers to the workpiece or blank obtained by forging metal blank. In the process of forging, the metal blank is plastically deformed under the pressure of forging hammer, press and other equipment, and then its shape, size and organizational structure are changed to meet specific use requirements.。

Forged parts for axle and shaft heads

2、Forged parts for axle and shaft heads advantage

The advantages of Forged parts for axle and shaft heads are as follows:

1. Eliminate internal defects

During the forging process, the porosity, shrinkage cavity, cracks and other defects in the metal are closed under the action of high temperature and pressure, thus improving the structural integrity of the Forged parts for axle and shaft heads.

2. Meet the requirements of complex working conditions

The Forged parts for axle and shaft heads has excellent mechanical properties and structural integrity, which can meet the use requirements under complex working conditions and ensure the long-term stable operation of the equipment.

3. Good fatigue resistance.

The particle flow inside the Forged parts for axle and shaft heads flows precisely along the contour of the part, and these continuous streamline lines are beneficial to reduce the incidence of fatigue or common faults.

4. high-intensity

Through forging, the internal structure of the metal is denser and the grain is refined, thus improving the strength of the material. Hot forging promotes crystallization and grain refinement, which enables materials to achieve the greatest possible strength and consistency, and reduces the variation between parts.

5. High degree of automation

Modern forging equipment has a high degree of automation, which can realize continuous and efficient production and greatly improve production efficiency.

Forged parts for axle and shaft heads

3、Forged parts for axle and shaft heads characteristics

Forged parts for axle and shaft headsfeatures include Can bear large impact force or heavy load., High productivity, Good anti-fatigue performance, Good mechanical properties and high tenacity，the product looks beautiful.，Forging can be used to exert pressure on the blank, so that it can produce plastic deformation and change its mechanical properties.、By forging, not only mechanical parts can be obtained, but also the internal structure of metal can be improved, and the mechanical and physical properties of Forged parts for axle and shaft heads can be improved.、Forging can be used to exert pressure on the blank, so that it can produce plastic deformation and change its mechanical properties.、Forging can eliminate metal porosity and holes, and improve the mechanical properties of Forged parts for axle and shaft heads.、After forging and hot working. Due to the deformation and recrystallization of metal, the structure is more compact, and the plasticity and mechanical properties of metal are improved.。

Forged parts for axle and shaft heads

4、Forged parts for axle and shaft heads HD real picture

Beautiful design, excellent material selection and excellent quality.。

Forged parts for axle and shaft heads

Note: All the pictures in this article were taken by Jianing forging manufacturer.。

5、Forged parts for axle and shaft heads introduction video

The following is the live video of Forged parts for axle and shaft heads designed and produced by Jianing for users, from which we can see the Forging can not only obtain the shape of mechanical parts, but also improve the internal structure of metal and improve the mechanical and physical properties of metal.、Forging machinery can be used to exert pressure on the blank to make it deform plastically, so as to obtain certain mechanical properties.、Forging can eliminate the defects of as-cast porosity and optimize the microstructure of metals during smelting.、Forging machinery can be used to exert pressure on the blank to make it deform plastically, so as to obtain certain mechanical properties.、By forging, not only mechanical parts can be obtained, but also the internal structure of metal can be improved, and the mechanical and physical properties of Forged parts for axle and shaft heads can be improved. of Jianingproduction-manufacturing的Forged parts for axle and shaft heads.。

Forged parts for axle and shaft heads

As you can see from the live video.，Shanxi jianing forging co., ltd Save raw materials,high-precision,High productivity,Good anti-fatigue performance,high-intensity。

Forged parts for axle and shaft headsit is widely used in war industry, automobile, rail traffic, war industry and metallurgy，the product looks atmospheric.，the advantage is After forging and hot working. Due to the deformation and recrystallization of metal, the structure is more compact, and the plasticity and mechanical properties of metal are improved.、Forging can eliminate metal porosity and holes, and improve the mechanical properties of Forged parts for axle and shaft heads.、After forging, its structure and mechanical properties can be improved.、Forging can eliminate the defects of as-cast porosity and optimize the microstructure of metals during smelting.、Forging can not only obtain the shape of mechanical parts, but also improve the internal structure of metal and improve the mechanical and physical properties of metal.。